DIGITAL CODE LOCK

ABSTRACT

           The project called ‘Digital Code Lock using AT89C2051′. LCD is used for display and a keyboard is used to input  the keys. This project source code is written in C.

                This a simple project with efficient hacking prevention from Brute Force etc. The basic user lock is of 5 Digits and Master Lock is of 10 digits so its not easy for an intruder to break the lock unless you keep the code simple.

The input is taken from a 4×3 Keypad (please see the schematic for more information) and Display the user input on a 2×16 LCD. A pin is assigned as output for activating and deactivating the lock. For demonstration an LED is connected to that pin.

The user has two options either he/she can use its own 5 digit code or use the default 5 digit code. If user has to do setup his own code, then he has to enter “12345″ and press ‘#’. After this.. controller will ask for 10 Digit master password which is preprogrammed in the controller. Entering master lock, user can enter the new 5 digit code for the lock and press ‘#’ to save it.

Keypad has 12 keys (4×3) starting from 1,2,3,4,5,6,7,8,9,*,0,# (please see the schematic for layout). Numeric keys are used for entering numbers. ‘*’ is used as the Cancel key and ‘#’ is used as the Enter key.

JJ

This is Mr.Jose John, 21 yrs old guy, currently pursuing final year mechanical engineering, now become an enthusiastic blogger and a successful entrepreneur.
Connect with him on: